Using Single Sheets
Your printer can accommodate single sheets with a width of 7.2 inches (182 mm) to 14 inches (264 mm).
If the pull tractor unit is installed, you need to remove it before you can print on single sheets. See “Removing the pull tractor” in Chapter 1.
Attaching the paper guide
Follow these steps to attach the paper guide:
1.Push the paper release lever back. Insert the paper guide pegs into the slots on the printer; then lean the guide back until it locks into place.
2.Slide the left edge guide until it locks in place at the guide mark. Next adjust the right edge guide to match the width of your paper.