Initialization
There are two kinds of initialization
Hardware | • | The power is turned on. |
initialization | • | An INIT signal at the parallel interface is received. |
|
| |
Software | The ESC @ command is received. | |
initialization |
|
|
|
|
|
Hardware initialization — When the printer is initialized, the following functions are performed.
1.The printer mechanism is initialized.
2.Input data buffer is cleared.
3.
4.Print buffer is cleared.
5.Default values are set.
Software initialization — Printer initialization by the ESC @ command does not perform functions 1, 2, and 3 above. The settings changed by the last control panel operation are reset.
| Technical Specifications |