Epson 1170, LQ-870 ALT, LF/FF, Note: You, LOAD/EJECT, LOAD/EJECT, MULTI-PART, MULTI- PART, 3-14Using the Printer, Adjusting the loading position

Micro Feed

2.While holding down the ALT button, press the LOAD/EJECT button to feed the paper forward or press the LF/FF button to feed the paper backward, as indicated by the arrows above the buttons.

Adjusting the loading position

The loading position is the position of the paper after it is automatically loaded by the printer. If your printing is too high or low on the page, you can change the loading position with the micro-feed feature as follows:

1.Make sure the printer is turned on.

2.Load either continuous or single-sheet paper (load continuous paper by pressing the LOAD/EJECT button). The MULTI-PARTlight begins to blink.

Note: You can adjust the loading position only while the MULTI- PART light is blinking.

3-14 Using the Printer