EPSON
Safety Approvals
120 V
Safety standards | UL 1950 |
| CSA C22.2 No. 950 |
EMI | FCC part 15 subpart B class B |
| CSA C108.8 class B |
230 V |
|
Safety standards | EN 60950 |
EMI | EN 55022 (CISPR pub. 22) class B |
| AS/NZS 3548 class B |
Acoustic noise | Approx. 49 dB (A) (ISO 7779 pattern) |
CE Marking
230 V |
|
Low Voltage Directive 73/23/EEC | EN 60950 |
EMC Directive 89/336/EEC | EN 55022 Class B |
| EN |
| EN |
EN
IEC 60801-2
IEC
IEC
Control Panel Buttons and Lights
Tear Off lights
ff When continuous paper is in the
Tear Off (Font) button
❏When the tractor is installed in the push position, advances continuous paper to the
❏Feeds continuous paper backward from the
LF/FF button
❏Feeds paper line by line when pressed and released.
❏When held down, ejects a single sheet or advances continuous paper to the next
Load/Eject button
❏Loads or ejects a single sheet of paper.
❏When the tractor is installed in the push position, loads continuous paper from the standby position or feeds continuous paper backward to the standby position.
Paper Out light
❏On when no paper is loaded in the selected paper source or paper is not loaded correctly.
❏Flashes when paper has not been fully ejected or a paper jam has occurred.
❏In Micro Adjust mode, selects the font indicated by the
Tear Off lights.
Pause button
Stops printing temporarily, and resumes printing when pressed again. When pressed for 3 seconds, turns on Micro Adjust mode.
Pause light
❏On when the printer is paused.
❏Flashes when the printer is in the Micro Adjust mode or when the print head has overheated.
Micro Adjust mode
When you hold down the Pause button for 3 seconds, the printer enters the Micro Adjust mode. In this mode, you can press the LF/FF D and Load/Eject U buttons to adjust the
5/00 | EPSON |