EPSON
Paper
Use recycled paper, envelopes, and
Temperature: 59 to 77 °F (15 to 25 °C)
Humidity: 30 to 60% RH
Do not load paper that has been folded or is damaged, wrinkled, or curled.
Ordinary single sheets:
paper guide and
Width | Paper guide |
| 3.9 to 10.1 inches (100 to 257) |
|
|
| 7.2 to 8.5 inches (182 to 216 mm) |
Length | Paper guide |
| 3.9 to 10.1 inches (100 to 257 mm) |
| |
| 10.1 to 14 inches (257 to 356 mm) |
Thickness | 0.0028 to 0.0047 inch (0.07 to 0.12 mm) |
| Cut sheet feeder: 0.0028 to 0.0055 inch (0.07 to |
| 0.14 mm) |
Weight | 14 to 24 lb (52 to 90 g/m2) |
| Cut sheet feeder: 18 to 24 lb (64 to 90 g/m2) |
Width | 3.9 to 10.1 inches (100 to 257 mm) |
Length | 3.9 to 14.3 inches (100 to 364 mm) |
Copies | 1 original + up to 4 copies |
Thickness | 0.0047 to 0.015 inch (0.12 to 0.39 mm) |
Weight | 12 to 15 lb (40 to 58 g/m2) |
Binding | Line glue at the top of form |
Envelopes |
|
Size | No. 6: 6.5 × 3.6 inches (165 × 92 mm) |
| No. 10: 9.5 × 4.1 inches (241 × 105 mm) |
Thickness | 0.0063 to 0.0205 inch (0.16 to 0.52 mm) |
Weight | 12 to 24 lb (45 to 90 g/m2) |
Continuous paper (standard and multipart): rear and bottom entry
Width | 4 to 10 inches (101.6 to 254 mm) | |
Length | 4 to 22 inches (101.6 to 558.8 mm) | |
Copies | 1 original + up to 4 copies | |
Thickness | Printable area |
|
| 0.0025 to 0.015 inch (0.065 to 0.39 mm) | |
| Perforated edges | |
| up to 0.035 inch (0.9 mm) | |
Weight (not multipart) | 14 to 22 lb (52 to 82 g/m2) | |
Weight (1 multipart sheet) | 12 to 15 lb (40 to 58 g/m2) | |
Binding | Spot glued or crimp bound on both sides (bottom | |
| or rear entry) |
|
❏The continuous multipart forms should be securely joined together along the left and right edges by crimping. Crimping should be pressed in from the original sheet side and go completely through all copy sheets.
❏The ratio of the cut/uncut length at the perforation should be between 3:1 and 5:1.
❏The perforation between pages should not extend all the way to the edges of the paper.
❏At the perforation between pages, the horizontal and vertical perforation cuts should not cross.
❏The thickness of the perforation part when extended should be 1 mm or less.
Continuous paper with labels: bottom entry only
Label size (minimum) | 0.938 × 2.5 inches (23.8 × 63.5 mm) |
| 0.1 inch (2.5 mm) corner radius |
Backing sheet width | 4 to 10 inches (101.6 to 254 mm) |
Backing sheet length | 4 to 22 inches (101.6 to 558.8 mm) |
Backing sheet thickness | 0.0028 to 0.0035 inch |
| (0.07 to 0.09 mm) |
Total thickness | 0.0063 to 0.0075 inch |
| (0.16 to 0.19 mm) |
Label weight | 17 lb (64 g/m2) |
Roll paper:
rear entry with optional roll paper holder only
Width | 8.5 ± 0.12 inch (216 ± 3 mm) |
Thickness | 0.0028 to 0.0035 inch (0.07 to 0.09 mm) |
Weight | 14 to 22 lb (52 to 82 g/m2) |
5/00 | EPSON |