EPSON
Paper Positions
Top-of-Form Position
The
The letters ABC are printed at the
Tear-off Position
Continuous paper is in the
Standby Position
Continuous paper is in the standby position when it is attached to the tractor but not loaded in the printer.
Printing on Continuous Paper
You can choose from two tractor positions (push and pull) for printing on continuous paper:
❏If you often need to tear off sheets of continuous paper (for printing purchase orders or sales slips, for example), it is best to use the push tractor. This allows you to use the
❏If you often print on thick or heavy continuous paper, such as multipart forms or continuous paper with labels, use a tractor in the pull position. You cannot use the
If you plan to use a tractor in the pull position, you can remove the tractor from the push position and reinstall it in the pull position, or you can purchase an optional tractor unit (C800301) and install it in the pull position.
Printing with the Push Tractor
When using the push tractor, it is a good idea to set the Auto
After you load paper, attach the paper guide to separate the incoming paper from the printed paper. Fit its notches over the printer’s mounting posts as shown below. Then slide the paper guide toward the front of the printer until you feel it click.
Switching Back to Single Sheets
To switch to single sheets, press the Load/Eject button; the printer feeds the paper backward to the standby position. Then you are ready to load single sheets for printing.
Always tear off the printed document before you press the Load/Eject button. Reverse feeding several pages at a time may cause a paper jam.
5/00 | EPSON |