Character Tables, Ascii Table, Code | Epson MP-2100 TH guide

User’s Manual

Chapter 4

Character Tables

The codes from 00h up to 7Fh are shown below:

Characters from 00h to 1Fh are “command characters” and therefore are not represented in the following tables

Image 14

Contents

Capa MP-2100 TH User´s Manual 5686 . Rev.1.1 November Europe EMC and Safety Standards AppliedCE Marking North America Safety Precautions Summary MP-2100 TH CommandsCommand tables Character Tables Presentation Printer Description Powering Unpacking Inserting the Paper Self-testing Normal Remote modeDump mode Printer head cleaning procedure Technical Specifications Communication Interfaces Serial Interface Parallel Interface Pin Assignments SignalParallel Interface Strobe USB Interface Associated Signal pinType B Receptacle Signal pin Code Character TablesAscii Table Code Tabela de Caracteres Code Using The Command Summary MP-2100 TH CommandsDirect Command Control Sequence Vertical Positioning Command TablesOperation Dec Hex Description ESC E Horizontal PositioningCharacter Types ESC F Print Width, Character Width And Height Barcodes Comand Hexadecimal Bit graphics Graphic Commands ExamplesBit Images And Graphics Parallel interface status byte Data ControlCommunication Status bit number Logic Error Status Continuous Paper 5. Firmware Bit Sensor StatusSerial interface status byte USB interface status bytes Byte Printer Status Appendix TroubleshootingProblem Possible Cause Automatic Line Advance Appendix Cutter Optional About the Cutter Special Care MP-2100 TH CleanupCleanup of the Thermal Printing Head Use Location Drawer Activation Pin Solenoid activation for drawer opening Errors Signaling Table Error Quantity of blinks Possible Cause Annotations Annotations Page