Print Width, Character Width And Height | Epson MP-2100 TH manual

User’s Manual

Print Width, Character Width And Height

ASCII	Dec	Hex	Description
DC2	18	12	Condensed mode (42 columns) off.

DC4	20	14	One-line expanded mode off.

ESC d n	100	64	Double height on (n=1) or off (n=0).

ESC H	72	48	48-column mode on (default).

ESC P	80	50	48-column mode on (default).

ESC SI	15	0F	Condensed mode (64 columns) on.

ESC SO	14	0E	One-line expanded mode on.

ESC V	86	56	One-line double height on.

ESC W n	87	57	Expanded mode on (n=1) or off (n=0).

SI	15	0F	Condensed mode (64 columns) on.

SO	14	0E	One-line expanded mode on.

Barcodes

Barcodes are obtained using the GS command sequences show below. Please note that all parameters and numbers are in decimal format, unless noted.

Comand	Hexadecimal			Description
Comand	Decimal			Description
	Decimal
GS h n	1D 68 n			Sets the height n of the barcode generated – each height unit corresponds
	29 104 n			t a dot of 0.125 mm, so the final height is n x 0.125 mm where 1 - n
				- 255. The default is n=162.

GS w n	1D 77 n			Determines the width of the barcode, where n=2 corresponds to nor-
	29 119 n			mal width, n=3 is double width and n=4 is quadruple width. The
				default is n=3.

				Choose the position of the human readable information (HRI) of the
				barcode.
GS H n	1D 48 n			n=0: No HRI
	29 72 n			n=1: On top of the barcode (default)
				n=2: On the bottom of the barcode
				n=3: Both on top and on the bottom of the barcode.

				Sets the font used to print the human readable information (HRI). The
GS f n	1D 66 n			default is n=0.
	29 102 n			n=0 or n=48 – normal
				n=1 or n=49 – condensed

GS k 0 d1...d11 NUL	1D 6B 00 d1...d11		00
	29 107 0 d1...d11		0	Prints an UPC-A barcode where d1...d11 is a sequence of 11 bytes
GS k 0 65 11d1...d11	1D 6B 41 0B d1...d11			containing the barcode information with 48 -d -57.
GS k 0 65 11d1...d11	1D 6B 41 0B d1...d11
	29 107 55 11 d1...d11

GS k 1 d1...d6 NUL	1D 6B 01 d1...d6	00
	29 107 1 d1...d6	0		Prints an UPC-E barcode where d1...d6 is a sequence of 6 bytes containing
GS k 66 6 d1...d6	1D 6B 42 06 d1...d6			the barcode information with 48 -d -57.
GS k 66 6 d1...d6	1D 6B 42 06 d1...d6
	29 107 66 6 d1...d6

GS k 2 d1...d12 NUL	1D 6B 02 d1...d12 00			Prints an EAN-13 barcode where d1...d12 is a sequence of 12 bytes
	29 107 2 d1...d12 0
	29 107 2 d1...d12 0			containing the barcode information with 48 -d -57.

20

Image 20

Epson MP-2100 TH manual Print Width, Character Width And Height, Barcodes

Contents

Capa MP-2100 TH User´s Manual 5686 . Rev.1.1 November EMC and Safety Standards Applied CE MarkingEurope North America Safety Precautions MP-2100 TH Commands Command tablesSummary Character Tables Presentation Printer Description Powering Unpacking Inserting the Paper Normal Remote mode Dump modeSelf-testing Printer head cleaning procedure Technical Specifications Communication Interfaces Serial Interface Signal Parallel InterfaceParallel Interface Pin Assignments Strobe USB Interface Associated Signal pinType B Receptacle Signal pin Code Character TablesAscii Table Code Tabela de Caracteres Code MP-2100 TH Commands Direct CommandUsing The Command Summary Control Sequence Command Tables OperationVertical Positioning Dec Hex Description Horizontal Positioning Character TypesESC E ESC F Print Width, Character Width And Height Barcodes Comand Hexadecimal Bit graphics Graphic Commands ExamplesBit Images And Graphics Parallel interface status byte Data ControlCommunication Error Status Continuous Paper 5. Firmware Bit Sensor Status Serial interface status byteStatus bit number Logic USB interface status bytes Byte Printer Status Appendix TroubleshootingProblem Possible Cause Automatic Line Advance Appendix Cutter Optional About the Cutter Special Care MP-2100 TH CleanupCleanup of the Thermal Printing Head Use Location Drawer Activation Pin Solenoid activation for drawer opening Errors Signaling Table Error Quantity of blinks Possible Cause Annotations Annotations Page