Appendix VI
Errors Signaling Table
In case an error occurs, it may be indicated through the LED PAPER. The quantity of LED blinks will indicate a possible error. After the corresponding quantity of blinks to the possible error, a pause will occur. The blinks and the pause are cyclical, according to the following table:
Error | Quantity of blinks | Possible Cause |
Mechanism | 3 | Thermal head damaged or connection problem |
|
| of the mechanism with the controlling board. |
Cutter | 4 | Cutter not operating. |
|
|
|
Power supply | 5 | Power supply voltage below 20 V |
|
|
|
Temperature | 6 | Thermal head temperature above safe conditions |
|
|
|
31
