❏Avoid using outlets on the same circuit as photocopies or air control systems that regularly switch on and off.

❏Position this product’s power cord so that it will not be stepped on or run over.

❏Do not place any objects on the power cord and the AC adapter.

❏Keep the power cord straight at the ends and at the points where it enters the transformer.

❏The power cord should be placed to avoid abrasions, cuts, fraying, crimping, kinking, and other damage.

❏If you cannot insert the plug into the power outlet, contact an electrician.

For US and Canadian users:

Use the included power cord or a 6 to 10 foot UL-approved type SPT-2 or heavier type, 2 X 18 AWG cord with a 125 V 10 A plug and 125 V 7 A connector.

When using a memory card

❏Only memory cards designed for the product’s specifications can be used.

❏The methods for using memory cards vary according to card type. Be sure to refer to the documentation included with your memory card for details.

❏Do not remove a memory card or turn off the product while the ACCESS light is flashing.

When using the LCD

❏The LCD panel on this product may contain a few small bright or dark spots. These are normal and do not mean that your LCD panel is damaged in any way.

❏If the LCD panel on this product is damaged, consult your dealer.

6Introduction