1.Remove the connector cover.

connector cover

2.Connect the AC adapter to PhotoPC P-1000 and a power outlet as shown below.cCaution:

Do not connect the AC adapter when the battery is not installed. Doing so may cause PhotoPC P-1000 to be damaged.

The CHARGE light flashes during charging. When the battery is fully charged, the CHARGE light turns off. It takes about 3.5 hours to fully charge the battery.

Setting and removing a memory card

This section describes how to set a memory card. See “Available types of memory cards” on page 16 for the types of memory cards that can be used.

cCaution:

To use a memory card correctly, read manuals provided with the memory card. When using other devices with a memory card, read manuals provided with those devices also.

Never remove a memory card while the ACCESS light is on. Doing so may cause data in the card or HDD to be lost or damaged.

Avoid using or storing the card in direct sunlight, or in places that are extremely hot, humid, or dusty.

2

2

2

2

2

2

2

2

2

2

Getting Started

15