Setting the language

When you turn on PhotoPC P-1000 the first time, the language setting screen is displayed. Select the language you want to use with the Four-waybutton, and press the OK button.

Language Setting

Language

English

Fran ais

DeutschItaliano

EspanolPortugues

Press OK to select and return to the previous screen. Press cancel to disregard the selection.

Setting the date and time

When you turn on PhotoPC P-1000 for the first time, the Date and Time Settings screen is displayed after you select the language. Set the date and time.

Note:

❏If you remove the battery from PhotoPC P-1000, the date and time settings will be erased after approximately two days maximum after the last time to used P-1000.

❏After changing the battery, make sure that the date and time is set correctly. If necessary, set the date and time again.

❏You can change the settings later. See “Changing PhotoPC P-1000 Settings” on page 48 for details about setting the date and time settings.

1.Turn the power on. The Date and Time Settings screen appears.

Date and Time Settings

 

Year:

Month:

Day:

2003

01

01

Hour:

Minute:

Format:

12

00

YYYY.MM.DD

Use the up or down button to select the year. Press OK to apply the setting.

2.Press the UP and Down buttons on the control panel to change the value of the selected item.

3.After you finish making settings, select a different item by pressing the Right and Left buttons on the control panel.

2

2

2

2

2

2

2

2

2

2

Getting Started

19