2.Press 
or 
to highlight Maintenance, then press OK.
3.Press 
or 
to highlight Clean Print Head, then press OK.
4.When you see this message, press OK to begin cleaning the print head.
The cleaning takes about 40 seconds, during which the message Cleaning print head. Please wait. appears on the screen and PictureMate makes some noise.
Caution: Never turn off PictureMate while it is cleaning its print head, unless it hasn’t moved or made noise for more than 5 minutes.
5.When cleaning is complete, you see a message asking if you want to print a nozzle check pattern. If you want to check to see if the nozzles are clean, load a sheet of photo paper (see Loading Paper), then press OK to print the nozzle check.
If you don’t want to print a nozzle check, press Cancel to go back to the PictureMate Main Menu.
6.Check the pattern to see if there are any gaps in the lines. Each staggered line should be solid, with no gaps, as shown.
79