Epson PM-7000C manual 40

6.15New Page (Form Feed) “FF”

Format:

ASCII FF

Hex0C

Decimal 12

Parameters Range: - Function:

-The contents of the print buffer are printed, the position management coordinate system is set to the next page, and the printing position is set to the origin on this new position management coordinate system.

-The paper is output.

-With single sheet paper, this command is ignored if no paper is input.

Initial State: -

Related Commands:

Commands related in the direction of applying an affect (Setting) None

Commands related in the direction of receiving an affect (Setting) None

Commands related in the direction of applying an affect (Operation) None

Commands related in the direction of receiving an effect (Operation) The page length is set by the ESC ( c command.

The page length and the left margin position are reset to their initial states by the ESC @ and ESC (G commands.

EPSON Imaging Technology Center	Page: 40
Revision: 1 (Date: 6/20/00)