6.16Enter Remote Mode Command “ ESC (R ”
Format: |
|
|
|
|
|
|
|
|
ASCII ESC | ( | R | 08H | 00H | 00H | REMOTE1 | ||
Hex | 1B | 28 | 52 | 08 | 00 | 00 | 52 45 | 4D 4F 54 45 31 |
Dec | 27 | 40 | 82 | 08 | 00 | 00 | 82 69 | 77 79 84 69 49 |
Function:
-This command is used to enter Remote Mode from ESC/P or ESC/P 2 mode.
-Exits current printer controls language and enters Remote Mode. This mode is maintained until the Exit Remote Mode command “ESC 00 00 00” is accepted by the printer.
Note:
-This command is only valid in text mode.
-If the printer buffer contains data prior to entering Remote mode, the data will be printed prior to entering Remote Mode.
-Once in Remote Mode, the printer does not accept ESC/P 2 commands.
EPSON Imaging Technology Center | Page: 41 |
Revision: 1 (Date: 6/20/00) |
|