6.18Set Paper Path ”PP” 03H 00H 00H m1 m2

Format:

“PP” 03H 00H 00H m1 m2

Parameters:

The parameter m1 is one byte binary value, and indicates the paper path:

Paper

m1

Manual feed

02H

Roll paper

03H

Reserved

04H - FFH

The parameter m2 is one byte binary parameter, and indicates the paper path Number. This has no meaning with Stylus Pro 7000

Function

-The paper path default environment is set.

-If the selected paper path by the panel is different from the paper path specified by this command, due to mismatch paper an error message appears with Stylus Pro 7000.

-If parameter m1 is out of range (00H, 01H, 04H-FFH), this command is ignored and the current setting is maintained.

-This command is only valid in remote mode.

EPSON Imaging Technology Center

Page: 43

Revision: 1 (Date: 6/20/00)