accessory of the printer. If the user uses narrower paper roll and requires more spacer plates, it can be purchased from Posiflex.
4.Paper cutting
The paper advance after a protective cut is now set to 12
mm.In case the user uses direct cut instead of protective cut to have something like a logo printed on top of each slip, it is also highly suggested to print the logo and necessary paper feeding to make 12 mm paper advance right after each cut to prevent curling up and jamming of paper front edge inside the paper exit slot.
5.Wall mount application
In wall mount application, the paper near end sensor will not have proper operation and it is suggested to set in the setup window to have the printer to send busy only when input buffer is full and not based on every off line signal.
2 - 11
