Epson PP-7000IIUSB warranty

port assignment setup will be required to use the USB printer as if a normal serial printer. The procedures described below may also be engaged any time whenever a re-assignment of the COM port number is required. Select “Start”, “Settings”, “System”, “Hardware”, “Device Manager” consecutively in the Windows screen and explode the item “Ports (COM & LPT)” to find the “Posiflex PP-7000IIUSB Thermal Printer” designated to a COM port number as in one of the pictures below.

Click right button of mouse on this item and select “Properties” then “Port Settings”, please set parameters in the right window according what the system integrator requires with the Application Program. A common practice is to set “19200” for “Bits per second”, “8” for “Data bits”, “None” for “Parity”, “1” for “Stop bits”, “Hardware” for “Flow control” if not specified.

Click “Advanced..” in this above window to select the “COM Port Number” to any number as required by the Application Program like the example screen in picture below. Then click “OK” and finalize the device manager. After reboot,

2 - 6