Epson Printer Setting the Jumpers, Built-inVGA jumper settings, 1+ Refer to the illustration on page 3-5to locate the jumpers

Jumper settings (continued)

*Factory setting

**MS-DOS automatically reassigns parallel and serial ports. Check your MS-DOS manual for more information.

Built-in VGA jumper settings

* Factory setting

Note

To use an external display adapter in an expansion slot, you must disable the built-in VGA adapter.

The jumpers listed in the preceding tables are the only jumpers you may need to change. Other jumpers on the system board are for service purposes only.

Setting the JumpersIf you need to change any jumper settings, follow these steps:1+ Refer to the illustration on page 3-5 to locate the jumpers.

2.If there are any option cards installed in your computer, you need to remove them to access the jumpers. See page 3-16.

Installing and Removing Options 3-7