4.Position the coprocessor over the socket as shown below. Align the notched comer of the coprocessor (marked with a dot) over the bevelled comer in the socket. Then gently push it straight into the socket, pressing evenly on all sides.

5. Replace any option cards you removed. See page 3-13.

Caution

Removing a coprocessor chip requires a special tool. To remove a chip, take your computer to an Authorized EPSON Servicer.

Post-installation Procedures

After you install or remove options such as memory modules or a math coprocessor, you must run SETUP to update the computer’s configuration. See Chapter 1 for instructions. Additionally, you may need to add some commands to your configuration files. See your operating system manual and the manual that came with your optional equipment.

3-20Installing and Removing Options