Connecting to a Projector on a Network and Projecting 15
CSelect the projector you want to connect to, and then click
"Connect".
You can select up to four projectors connected to the same network
and project the same images at the same time.
If the projector you want to connect to is not dis played in the search
results, click the Automatic search button. The search takes about
30 seconds.
For details on the connection screen, see "Using the Connection
Screen". s p.16
DWhen Projector keyword is set to "On" from the projector,
the keyword entry screen is displayed. Enter the keyword
displayed on the LAN standby screen, and then click "OK".
When the connection is complete, the computer screen is project-
ed. The following EasyMP Network Projection toolbar is displayed
on the computer screen. You can use this toolbar to operate the
projector and make settings, and to disconnect the network con-
nection. For details on using the toolbar, see "Using the Toolbar".
sp.18
qWhen connecting from another computer, such as when changing
presenters, start EasyMP Network Projection from the computer you want
to connect. The computer that is currently connected is disconnected, and
the projector is then connected with the computer that is trying to connect
now.