Using the Connection Screen 18
Using the Toolbar
The toolbar is displayed on the computer screen after EasyMP Network
Projection starts and a connection is made with the projector. You can
use this toolbar to operate and make settings for the projector.
Select target projector
Click to limit the projectors operated from the toolbar when
projecting from multiple projectors using the distribution
function or Multi-screen display. The indication below th e
icon shows the projectors that can be controlled.
ALL indicates that all of the connected projectors can b e
controlled.
For example, when "1, 3" is displayed, projectors No. 1 and
No. 3 can be controlled.
Click to display the following screen.
ASelect the projector to be controlled.
BIndicates the No. of an allocated projector. This No.
indicates the No. of the projector that you can control
from the toolbar.
CIndicates the status of the projector.
Stop
Stops projection while connected to the projector.