Epson Pro Z8050WNL Cannot connect in Advanced Connection Mode or Wired LAN connection

Troubleshooting 58
Cannot connect in Advanced Connection Mode or Wired LAN connection
The Slide Show cannot be displayed on the desired display when the multi-screen display function is being executed.
Applications are no longer displayed from the computer screen when the multi-screen display function is executed.
Check Remedy
Are the SSID settings for the computer, access point, and
projector different?
Set the computer, the access point, and the projector to the same SSID. See your User’s Guide for more
information.
Are the WEP keys set properly? When selecting WEP from Security, set the access point, the computer, and the projector to the same
WEP key. See your User’s Guide for more information.
Are the connection denial functions, such as MAC
Addressg restrictions and port restrictions, set correctly at
the access point?
Set the projector to allow connections from the access point.
Are the IP address, the Subnet Mask, and the Gateway
Address for the access point and the projector set
correctly?
When not using a DHCP, adjust each setting. See your User’s Guide for more information.
Are the access point and the projector's subnet different? Select Manual search from EasyMP Network Projection, specify the IP address, and connect.
sp.36
Check Remedy
Are you using PowerPoint 2002 or an earlier version?
For Windows
To set and use two or more virtual displaysg, use PowerPoint 2003 or later, or limit the number of
virtual displays to one before displaying the Slide Show.
Check Remedy
Is another application running on the virtual displayg?
For Windows
When EPSON Virtual Display is installed, another application sometimes runs on the vi rtual display. In
this case, set EPSON Virtual Display to "Off" in "Screen properties".