Using Multi-Screen Display 27
Procedure Before Using the Multi-screen Display
Function
Setting the Virtual Display
This section explains the virtual display for arrangement ex ample 1.
sp.26
Enable the virtual display driver (Windows only)
Enable the virtual displayg driver. Those users listed below do not have
to perform this operation and should skip to s"Adjusting the Virtual
Display" p.28.
•Those users who have enabled virtual displays installing EasyMP
Network Projection.
•Those users with Macintosh computers.
Procedure
AStart Windows on the computer, then se lect "Start" -
"Programs" (or "All Programs") - "EPSON Projector" -
"Add-Remove EPSON Virtual Display".
The Add-Remove EPSON Virtual Display screen is displayed.
BSelect the virtual display you want to use.
Up to four monitors can be added. In this example, a single virtual
display is to be used. When setting multiple virtual displays, select
as many displays as is necessary.
Any one of the displays can be selected.
CClick "OK".
When you click OK, the drivers for the virtual display are enabled.
At this point, it is normal for the display to flicker. Wait for the
Add-Remove EPSON Virtual Display screen to close.
1. Setting the Virtual Display sp.27
In a Windows environment, enable the virtual displayg driver as
necessary. And, for both Windows and Macintosh, set up the virtual
display arrangement.
2. Allocating the image to be projected sp.31
Open the file to be projected, and then move the screen to the virtual
display according to the actual projection arrangement.
3. Projecting the allocated images sp.32
Allocate a virtual display number to a projector that is connected
through the network, and then start projection.