Manuals
/
Epson
/
Computer Equipment
/
Network Card
Epson
PS-1216U user manual Version 1.1 November, User’s Manual, Fast Ethernet Combo Print Server
Models:
PS-1216U
1
1
51
51
Download
51 pages
56.16 Kb
1
2
3
4
5
6
7
8
<
>
Troubleshooting
Install
Server Configuration
Setup Wizard
Click the “IP” button to enter the IP setting page. If you need the Combo Print Server to automatically get an IP from DHCP server, select “Auto IP”. You can also select “Static IP” to manually assign “IP Address”, “Subnet Mask” and “Gateway” for the Combo Print Server. By default, “Static IP” is enabled and the default settings are as follows
Advanced Settings
Upgrade Firmware from Browser
Login
Password
Select “Auto IP” and click “Save” 3. Reboot the Combo Print Server
Page 1
Image 1
Fast Ethernet
Combo Print Server
User’s Manual
Version: 1.1 (November, 2006)
Page 2
Page 1
Image 1
Page 2
Contents
User’s Manual
Version 1.1 November
Fast Ethernet Combo Print Server
COPYRIGHT
DISCLAIMER
FCC COMPLIANCE STATEMENT
8. Troubleshooting
Contents
Server Configuration
Setup Wizard
1. Introduction
One Combo Print Server One Power Adapter
2. Product Package
One Quick Installation Guide
This package contains the following components
3. Combo Print Server
4. Getting Started
4.1 Hardware Installation Procedure
4.2 Software Installation Procedure
Page
5. The system starts installing the Print Server Utilities
Page
Page
10. Set the “Alias Name” to the Print Server here. Click on “Next”
IP Address Subnet Mask
Page
Page
4.2.1 GDI/Host-based Printer
Page
Page
6. Select the correct driver and click “Next”
7. After the driver is installed, click “Finish”
8. After the drivers are installed completely no more prompt message. Your GDI printer has been bound with the Print Server to your computer. Please click “Print Test Page” to confirm that you can print through the network successfully
4.2.1.1
10. Congratulations, the printer is installed successfully. The installed printer will be added to the “Printers & Faxes” in the Windows. If you want to print documents, please select “Printer Model NameNetwork”
Using GDI Printer
Page
4.3 Print Server Utilities
5. Setup Wizard
6.1 Introduction
6. Server Configuration
6.2 Search for All Available Combo Print Server
6.3 Status of Combo Print Server
6.4 Setup the Combo Print Server
6.5 General Configuration
6.6 TCP/IP Configuration
IP Address Assignment
Click the “IP” button to enter the IP setting page. If you need the Combo Print Server to automatically get an IP from DHCP server, select “Auto IP”. You can also select “Static IP” to manually assign “IP Address”, “Subnet Mask” and “Gateway” for the Combo Print Server. By default, “Static IP” is enabled and the default settings are as follows
IP Address Subnet Mask
DHCP Server
6.7 System Configuration
7.1 Introduction
7. Web Management
IP Address User Name admin Password
Note Default User Name is “admin”, default password is “1234”
7.2 Login
7.3.1 System
7.3 Device Setup
Page
7.3.2 Printer
7.3.3 TCP/IP
7.4.1 System
7.4 Setup Wizard
Some advanced feature of the Combo Print Server can be set here
7.4.1.1 Advanced Settings
7.4.2 TCP/IP
the settings and restart the system
7.4.3 Save Settings
7.5 System Tools
7.5.1 Load Default
7.5.2 Upgrade Firmware from Browser
8. Troubleshooting
1. Open “Server Manager” and then select “TCP/IP” setting
Type ipconfig /all and click enter z Your PC’s IP address is
2. Select “Auto IP” and click “Save” 3. Reboot the Combo Print Server
Set up the IP Address Manually
Page
GDI Printers
Appendix Combo Print Server Compatibility List
No. Company
Printer Model