Manuals / Epson / Computer Equipment / Network Card

Epson PS-1216U user manual Login, Note Default User Name is “admin”, default password is “1234”

Models: PS-1216U

1 51

Download 51 pages 56.16 Kb

Page 37

7.2Login

You may use any Web Browser to review the status or configure the settings of the Combo Print Server. After entering the IP address of the Combo Print Server, a login page display. You have to enter correct “User Name” and “Password” before going to the Web Management pages.

Note: Default User Name is “admin”, default password is “1234”.

33

Image 37

Epson PS-1216U user manual Login, Note Default User Name is “admin”, default password is “1234”

Contents

User’s Manual Version 1.1 NovemberFast Ethernet Combo Print Server COPYRIGHT DISCLAIMER FCC COMPLIANCE STATEMENT8. Troubleshooting ContentsServer Configuration Setup Wizard1. Introduction „ One Combo Print Server „ One Power Adapter 2. Product Package„ One Quick Installation Guide This package contains the following components3. Combo Print Server 4. Getting Started 4.1 Hardware Installation Procedure4.2 Software Installation Procedure Page 5. The system starts installing the Print Server Utilities Page Page 10. Set the “Alias Name” to the Print Server here. Click on “Next” IP Address Subnet Mask Page Page 4.2.1 GDI/Host-based Printer Page Page 6. Select the correct driver and click “Next” 7. After the driver is installed, click “Finish”8. After the drivers are installed completely no more prompt message. Your GDI printer has been bound with the Print Server to your computer. Please click “Print Test Page” to confirm that you can print through the network successfully 4.2.1.1 10. Congratulations, the printer is installed successfully. The installed printer will be added to the “Printers & Faxes” in the Windows. If you want to print documents, please select “Printer Model NameNetwork”Using GDI Printer Page 4.3 Print Server Utilities 5. Setup Wizard 6.1 Introduction 6. Server Configuration6.2 Search for All Available Combo Print Server 6.3 Status of Combo Print Server 6.4 Setup the Combo Print Server 6.5 General Configuration 6.6 TCP/IP Configuration IP Address Assignment Click the “IP” button to enter the IP setting page. If you need the Combo Print Server to automatically get an IP from DHCP server, select “Auto IP”. You can also select “Static IP” to manually assign “IP Address”, “Subnet Mask” and “Gateway” for the Combo Print Server. By default, “Static IP” is enabled and the default settings are as followsIP Address Subnet Mask DHCP Server6.7 System Configuration 7.1 Introduction 7. Web ManagementIP Address User Name admin Password Note Default User Name is “admin”, default password is “1234” 7.2 Login7.3.1 System 7.3 Device SetupPage 7.3.2 Printer 7.3.3 TCP/IP 7.4.1 System 7.4 Setup WizardSome advanced feature of the Combo Print Server can be set here 7.4.1.1 Advanced Settings7.4.2 TCP/IP the settings and restart the system 7.4.3 Save Settings7.5 System Tools 7.5.1 Load Default7.5.2 Upgrade Firmware from Browser 8. Troubleshooting 1. Open “Server Manager” and then select “TCP/IP” setting Type ipconfig /all and click enter z Your PC’s IP address is2. Select “Auto IP” and click “Save” 3. Reboot the Combo Print Server „ Set up the IP Address ManuallyPage GDI Printers Appendix Combo Print Server Compatibility ListNo. Company Printer Model