Manuals / Epson / Computer Equipment / Network Card

Epson PS-1216U user manual Setup Wizard

Models: PS-1216U

1 51

Download 51 pages 56.16 Kb

Page 27

5. Setup Wizard

The “Setup Wizard” will guide you to install the Normal printer or GDI printer with the Combo Print Server into your computer.

If there is a new Combo Print Server installed in the network or the Combo Print Server you have installed doesn’t work, please run the “Setup Wizard” to install again. Please refer to the Section 3.2 for the detailed setup procedures.

Note: In Windows 98SE/Me/NT, the “Setup Wizard” will only allow you to install “Normal Printer”.

23

Image 27

Epson PS-1216U user manual Setup Wizard

Contents

Version 1.1 November User’s ManualFast Ethernet Combo Print Server COPYRIGHT DISCLAIMER FCC COMPLIANCE STATEMENTSetup Wizard Contents8. Troubleshooting Server Configuration1. Introduction This package contains the following components 2. Product Package„ One Combo Print Server „ One Power Adapter „ One Quick Installation Guide3. Combo Print Server 4. Getting Started 4.1 Hardware Installation Procedure4.2 Software Installation Procedure Page 5. The system starts installing the Print Server Utilities Page Page 10. Set the “Alias Name” to the Print Server here. Click on “Next” IP Address Subnet Mask Page Page 4.2.1 GDI/Host-based Printer Page Page 6. Select the correct driver and click “Next” 7. After the driver is installed, click “Finish”8. After the drivers are installed completely no more prompt message. Your GDI printer has been bound with the Print Server to your computer. Please click “Print Test Page” to confirm that you can print through the network successfully 4.2.1.1 10. Congratulations, the printer is installed successfully. The installed printer will be added to the “Printers & Faxes” in the Windows. If you want to print documents, please select “Printer Model NameNetwork”Using GDI Printer Page 4.3 Print Server Utilities 5. Setup Wizard 6.1 Introduction 6. Server Configuration6.2 Search for All Available Combo Print Server 6.3 Status of Combo Print Server 6.4 Setup the Combo Print Server 6.5 General Configuration 6.6 TCP/IP Configuration DHCP Server Click the “IP” button to enter the IP setting page. If you need the Combo Print Server to automatically get an IP from DHCP server, select “Auto IP”. You can also select “Static IP” to manually assign “IP Address”, “Subnet Mask” and “Gateway” for the Combo Print Server. By default, “Static IP” is enabled and the default settings are as followsIP Address Assignment IP Address Subnet Mask6.7 System Configuration 7. Web Management 7.1 IntroductionIP Address User Name admin Password Note Default User Name is “admin”, default password is “1234” 7.2 Login7.3.1 System 7.3 Device SetupPage 7.3.2 Printer 7.3.3 TCP/IP 7.4.1 System 7.4 Setup WizardSome advanced feature of the Combo Print Server can be set here 7.4.1.1 Advanced Settings7.4.2 TCP/IP the settings and restart the system 7.4.3 Save Settings7.5 System Tools 7.5.1 Load Default7.5.2 Upgrade Firmware from Browser 8. Troubleshooting „ Set up the IP Address Manually Type ipconfig /all and click enter z Your PC’s IP address is1. Open “Server Manager” and then select “TCP/IP” setting 2. Select “Auto IP” and click “Save” 3. Reboot the Combo Print ServerPage Printer Model Appendix Combo Print Server Compatibility ListGDI Printers No. Company