Manuals / Epson / Computer Equipment / Network Card

Epson PS-1216U user manual System Tools, Load Default

Models: PS-1216U

1 51

Download 51 pages 56.16 Kb

Page 46

7.5System Tools

7.5.1Load Default

You can use this page to restore the factory default settings. Click “OK” and after the print server is restarted, the process is completed. Be aware that all of your previous setup will be cleared.

42

Image 46

Epson PS-1216U user manual System Tools, Load Default

Contents

User’s Manual Version 1.1 NovemberFast Ethernet Combo Print Server COPYRIGHT FCC COMPLIANCE STATEMENT DISCLAIMERServer Configuration Contents8. Troubleshooting Setup Wizard1. Introduction „ One Quick Installation Guide 2. Product Package„ One Combo Print Server „ One Power Adapter This package contains the following components3. Combo Print Server 4.1 Hardware Installation Procedure 4. Getting Started4.2 Software Installation Procedure Page 5. The system starts installing the Print Server Utilities Page Page 10. Set the “Alias Name” to the Print Server here. Click on “Next” IP Address Subnet Mask Page Page 4.2.1 GDI/Host-based Printer Page Page 7. After the driver is installed, click “Finish” 6. Select the correct driver and click “Next”8. After the drivers are installed completely no more prompt message. Your GDI printer has been bound with the Print Server to your computer. Please click “Print Test Page” to confirm that you can print through the network successfully 10. Congratulations, the printer is installed successfully. The installed printer will be added to the “Printers & Faxes” in the Windows. If you want to print documents, please select “Printer Model NameNetwork” 4.2.1.1Using GDI Printer Page 4.3 Print Server Utilities 5. Setup Wizard 6. Server Configuration 6.1 Introduction6.2 Search for All Available Combo Print Server 6.3 Status of Combo Print Server 6.4 Setup the Combo Print Server 6.5 General Configuration 6.6 TCP/IP Configuration IP Address Subnet Mask Click the “IP” button to enter the IP setting page. If you need the Combo Print Server to automatically get an IP from DHCP server, select “Auto IP”. You can also select “Static IP” to manually assign “IP Address”, “Subnet Mask” and “Gateway” for the Combo Print Server. By default, “Static IP” is enabled and the default settings are as followsIP Address Assignment DHCP Server6.7 System Configuration 7.1 Introduction 7. Web ManagementIP Address User Name admin Password 7.2 Login Note Default User Name is “admin”, default password is “1234”7.3 Device Setup 7.3.1 SystemPage 7.3.2 Printer 7.3.3 TCP/IP 7.4 Setup Wizard 7.4.1 System7.4.1.1 Advanced Settings Some advanced feature of the Combo Print Server can be set here7.4.2 TCP/IP 7.4.3 Save Settings the settings and restart the system7.5.1 Load Default 7.5 System Tools7.5.2 Upgrade Firmware from Browser 8. Troubleshooting 2. Select “Auto IP” and click “Save” 3. Reboot the Combo Print Server Type ipconfig /all and click enter z Your PC’s IP address is1. Open “Server Manager” and then select “TCP/IP” setting „ Set up the IP Address ManuallyPage No. Company Appendix Combo Print Server Compatibility ListGDI Printers Printer Model