Attaching the Strap to the Camera

1.Remove the protective pads and metal rings from the strap.

Metal ring

Protective pad

2.Attach the protective pad and the metal ring to one side of the camera.

3.Lace the end of the strap through the holes in the protective pad and the metal ring.

4.Lace the strap end through the two plastic fasteners.

5.Repeat these steps to attach the other end of the strap to the other side of the camera.

Using the Battery

cCaution:

Only use the Epson lithium-ion battery (EU-85). Do not use any other make or model of battery under any circumstances.

Charging the Battery

The camera comes with a lithium-ion battery (model EU 85). Be sure to charge it before using the camera for the first time, or if you have not used it for a long time. It takes approximately 3.5 hours to fully charge a new or empty battery.

1

1

1

1

1

1

1

1

1

1

Getting Started

11