Epson R-D1s Basic Setup Menu, 34Customizing the Settings

	Setting	Description
	(Long Exp Noise	Reduces noise that appears on an image taken
Reduction)		with a long exposure. The shooting time may
		become longer depending on shooting
		conditions.
	(Color Space)	Selects the color space from sRGB or Adobe
		RGB. Adobe RGB is a wider color space than
		sRGB and encompasses the colors that can be
		printed with CMYK inks. Select Adobe RGB if you
		have a printer that supports it.
	(RAW Setting)	Sets the image format recorded when shooting
		in RAW mode. You can select RAW format only,
		or both RAW and JPEG (high resolution) format
		in a single file. RAW+JPEG provides the
		convenience of viewing the JPEG image on
		most computers while retaining the RAW data
		for postprocessing, at an increase in image size
		and memory card access time.
	(Film Setting)	Allows you to quickly switch film profiles to best
		suit the shooting subject or environment. For
		each film profile (Film1, Film2, or Film3), you can
		assign Edge Enhance, Saturation, Tint, Contrast,
		and NR (Noise Reduction). By default, Film1 is
		preset for portrait, Film2 for landscape, and
		Film3 for night pictures. Use Standard if no
		particular profile is required.

Basic Setup Menu

Setting	Description
Time and Date	Sets the current date and time
	(year, month, day, hours and minutes).
	See “Setting the Time and Date” on page 39.
Date Format	Selects date display format from the following:
	YYYY/MM/DD (default setting),
	MM/DD/YYYY,
	DD/MM/YYYY
Power Save Timer	Selects the length of time before the camera
	enters the power save mode, in which the LCD
	monitor is turned off automatically to reduce
	power consumption.
	The available settings are 3min, 5min (default
	setting), 10min, or 20min.
	Press any button to exit the power save mode.
Sequential Numbering	Specifies whether to save images with a
	sequential number (as part of the file name).
	On (default): sequential numbers continue
	even if the memory card is replaced.
	Off: sequential numbers end and a new
	sequence of numbers starts when the memory
	card is replaced.
LCD Brightness	Changes brightness of the LCD monitor.
	Also shows the firmware version.
Language	Selects the language for messages and menus
	displayed on the LCD monitor from the
	following: Japanese, English, French, German,
	Italian, Spanish, Dutch, T (Traditional)-Chinese
	Note:
	The languages available may vary depending
	on the country of purchase.

34Customizing the Settings