Step 10 Installing the Chip Support Bars
When you have positioned the chip blocks into place you will need to insert and install the support bars as indicated the correct way up (Arrow up) as illustrated in Fig. 24. Please ensure that you insert the bars as illustrated in Fig.25 making sure that the Groove is on the far end.
Fig. 24
Groove
Fig. 25
Insert the bar as illustrated making sure that this is pushed firmly into place see Fig.26, repeat this for the other side and the other chip block, so that you have both chip blocks and support bars as illustrated if Fig.27.
Fig. 26
Fig. 27
11
