10.Push the paper into the feeder until the paper meets resistance. Maintain pressure on the paper until the printer feeds the paper automatically.

Note: You may need to reload canvas or thicker roll media to ensure accurate paper registration.

When loading PremierArt Water-Resistant Canvas, leave some slack between the roll and the printer to ensure smooth loading. Make sure to maintain slack while printing.

When cutting roll media, it is important to have a straight edge. An uneven edge may result in misfeeds, misregistration, or unacceptable print quality.

11.Open the printer cover and look down into the printer to make sure the paper is straight.

If crooked, press the

z roll paper button for three seconds

If the paper is crooked, press the z roll paper button for three seconds to back the paper all the way out.

Then turn the roll paper holder knobs to roll up the paper. Press the ) paper button to clear the paper out error. Repeat steps 7 through 9 to reload the paper.

Follow the instructions on page 43 to print on roll paper.

Loading Paper 23