Loading Envelopes
You can load up to 10 envelopes at a time, as described below.
Tip: For best results, press each envelope flat before loading it, or load one envelope at a time.
1.Open the paper support and pull up the support extension
2.Open the output tray and its extensions.
Make sure the tray is in the lower position.
3. Load envelopes short edge first as shown, with the flap side down and the flap edge on the left side.
4. Slide the left edge guide against the envelopes.
5. Choose these settings in your printer software:
■ Plain Paper as the Type (Windows)
Paper support
or Media Type (Macintosh) setting
Output tray
■The envelope size as the Size (Windows) or Paper Size (Macintosh) setting
■Landscape as the Orientation setting
See page 20 (Windows), page 25 (Macintosh OS X), or page 29 (Macintosh OS 8.6 to 9.x) for instructions.
Note: If printing is smeared on your envelope or on other thick paper, select the Thick paper and envelopes checkbox in your printer software. See page 95 for instructions.
Loading Paper 15