Inserting a CD or DVD
Make sure the data, music, or video is burned on your
If you want to check the print position or color before printing on your actual CD or DVD, see “Adjusting the Print Position” on page 70 or “Adjusting the Print Density” on page 74.
1. Turn on the printer.
Note: Before you insert a CD or DVD, make sure the printer is turned on. Otherwise, the disc may not be positioned correctly.
2.Remove any paper from the sheet feeder, then push in the paper support extension and close the paper support.
3.Push in the output tray extensions, but leave the tray open.
4.Lift the output tray as shown below, then place one hand on the top of the printer and pull up on the output tray until it stops. Lay the tray down in the upper position.
Printing on CDs and DVDs 63