Loading Roll Paper

You can load 4-inch and 8.3-inch wide roll paper for printing multiple photos or panoramics, with or without borders.

Tip: It’s a good idea to check and make sure your ink cartridges are not low before loading and printing on roll paper. If you need to replace a cartridge with roll paper loaded, you should remove the paper or marks may appear in

your printout.

1.Turn on the printer and remove any paper loaded in the sheet feeder at the top

of the printer.

2.

Open the output tray, but don’t pull out

 

 

the extensions. Also make sure the tray is

 

 

in the lower position (see page 13).

 

3.

Place the roll paper on the holders as

 

 

shown, then remove the tape and

 

 

protective paper from the end of the roll.

 

4.

Make sure the end of the paper is cut

90°

 

straight across, with 90° corners. If the

 

 

end is cut diagonally, you may have

 

 

problems feeding the paper.

 

5.

If the paper curls at the end, roll it

 

 

backwards between a folded sheet of

 

 

paper to uncurl it.

 

Avoid touching the printable surface of the roll paper.

16 Loading Paper