6.Insert the left roll paper holder (marked with an orange triangle) into the far left slot (also marked with an orange triangle). Then insert the other holder into the corresponding slot on the right.
7.Load the paper part of the way into the roll paper feeder, then slide the right roll paper edge guide to fit lightly against the paper.
Caution: Don’t load roll paper into the sheet feeder behind the paper support.
8.Push the paper into the feeder as far as it will go; the printer feeds the paper automatically.
9.To verify that the paper is loaded straight, open the printer cover and look into the printer.
If the paper is crooked, press the z roll paper button for three seconds to back the paper all the way out.
Then turn the roll paper holder knobs to roll up the paper. Press the z roll paper button to clear the paper out error.
Repeat steps 7 through 9 to reload the paper.
Follow the instructions on page 35 to print on roll paper.
Don’t load roll paper here
If crooked, press 
z button for three seconds 
Loading Paper 17