1.Make sure the printer is turned on but not printing, and the red H ink light is off. (If the H ink light is flashing or on, you need to replace a cartridge; see page 80.)
2.Do one of the following:
Windows: 
icon on your taskbar (in the lower right corner of your screen). Select Head Cleaning.
Mac OS X: Open the Applications folder and select EPSON Printer Utility. Select SP R800 in the printer list, click OK, and select Head Cleaning.
Mac OS 8.6 to 9.x: Choose File > Page Setup or Print. Click the 
utility icon, then click Head Cleaning.
3.Follow the instructions on the screen to clean the print head.
Cleaning takes about two minutes, during which the printer makes noise and the green P power light flashes.
Caution: Never turn off the printer while the green P power light is flashing, unless the printer hasn’t moved or made noise for more than 5 minutes.
4.When the green P power light stops flashing, make sure paper is loaded in the printer. Click Print nozzle check pattern, then click Print (Windows) or click Confirmation, then click Next (Macintosh). The nozzle check pattern prints.
5.If the nozzle check pattern has no gaps or lines (as shown below), click Finish.
Maintaining Your Printer 79