CHAPTER 3: CONNECTION
CHAPTER 3 CONNECTION
This chapter describes the connection between the S5U1C63000H2 and a host computer and the Peripheral circuit board (S5U1C63xxxP).
3.1 AC Cable
The S5U1C63000H2 package includes a dedicated AC cable (3 poles type) and an AC adapter. The AC cable is connected into the AC inlet on the AC adapter. The common ground frame line should be used for connecting the S5U1C63000H2 and the host computer as shown in Figure 3.1.1.
Host machine | S5U1C63000H2 |
DCIN (DC 5 V)
terminal
AC adapter dedicated for S5U1C63000H2
AC inlet
DC cable
AC cable
AC line
Frame ground line
Fig. 3.1.1 Connection of AC line
3.2 DC Cable
The DC output cable of the AC adapter is connected to the DCIN (DC 5 V input) terminal as shown in Figure 3.1.1.
3.3 Connection with Host Personal Computer
Figure 3.3.1 shows the external view of the RS232C cable connector and Table 3.3.1 shows the signal specifications of the RS232C cable.
| 5 | 2 | 1 |
|
|
|
| A |
|
| 9 |
| 6 |
|
| Viewed from side A |
| ||
|
|
| ||
| Fig. 3.3.1 | External view of the RS232C cable connector | ||
|
| Table 3.3.1 Signal specifications |
| |
Terminal No. Signal name | Signal meaning | Remarks | ||
3 | TXD |
| Transmit data from HOST to ICE |
|
2 | RXD |
| Receive data from ICE to HOST |
|
7 | RTS |
| Request to send from HOST | Normally used as ON |
8 | CTS |
| Clear to send from ICE | Normally used as ON |
5 | SG |
| Signal ground |
|
Connect S5U1C63000H2 to the personal computer using the supplied RS232C cable and tighten the connector screws to fix the cable.
S5U1C63000H2 MANUAL | EPSON | 7 |
(S1C63 FAMILY |
|
|