Caution

Use the paper guides only if paper is curled and doesn’t feed properly. Otherwise, the paper guides may damage your prints.

Resolving Problems 7-9

•Make sure the printer’s environment falls within the required temperature and humidity range.

•Make sure the paper is not too thick or too thin. See pages 2-1 and A-4 for paper specifications.

•Make sure no foreign objects are inside the printer.

•Make sure the printer isn’t located in a brightly lit area. The paper sensor may not be able to operate correctly.

•Make sure the Media Type and Paper Source settings in the printer software are correct.

•Make sure the platen gap setting is correct for the paper or media you’re printing on. See page 2-13for more information.

•If you’re not using EPSON media, make sure you register and select your paper’s thickness. See page 2-18 for more information.

Solving Roll Paper Feed Problems

If your roll paper is curled too tightly and doesn’t feed out of the printer, you can use the three paper guides. Extend the guides as shown below: