Note

This section tells you how to configure your printer as a shared printer on a network. To connect your printer directly to a network without setting it up as a shared printer, consult your network administrator.

Note

Turning background printing on allows you to use Monitor3 to manage the print queue on the host computer. See page 3-14for details.

Setting Up the Printer 1-17

Setting Up on a Macintosh Network

This section explains how to set up the Stylus Pro 10000 as a shared printer on an AppleTalk network. First install the printer software on every computer that will need to access the printer, as described on page 1-13.

Then configure the host Macintosh (the computer to which you connected the printer) to share the printer, and configure the client Macintosh computers to connect to it, as described in the next two sections.

Configuring the Host Macintosh

Perform these steps on the Macintosh to which you connected the printer:

1.Turn on the printer, open the Chooser, and click the printer’s icon. Then select the icon for the USB port your printer is connected to.

2.Click the On radio button to turn Background Printing on.

3.Click the Setup button. You see the following dialog box.