Epson TX102, TX105, SX100, TX100, NX105, ME 300, SX105, TX101, TX106, TX109, TX103 Maintenance p.116. TBD

Epson STYLUS NX100/NX105/SX100/SX105/TX100/TX101/TX102/TX103/TX105/TX106/TX109/ME 300						Revision A
	Table 3-2. Check point for Fatal error according to each phenomenon
Occurrence timing	Detailed phenomenon	Defective		Check point		Remedy
CR position		unit/part name
			1.	Check if the grease is enough on the Guide Rail of the	1.	After wiping the grease on the Guide Rail of
				Lower Scanner Housing. (TBD)		the Lower Scanner Housing with a dry, soft
• Operation	The Scanner Carriage Unit. does not	Lower Scanner				cloth, coat it with grease. (Refer to Chapter 6
• Anywhere	operate.	Housing				"MAINTENANCE" (p.116).) (TBD)
			2.	Check if the Scanner Carriage Unit is correctly	2.	Reassemble the Scanner Carriage Unit
				assembled.		correctly.
			1.	Check if the CR Motor Cable is connected to J7 on the	1.	Connect the CR Motor Cable to J7 on the Main
				Main Board.		Board.

J7

• Power on	When turning on the power, the CR	CR Motor
• Anywhere	Motor does not operate at all.

		CR Motor Cable
2.	Check if the CR Motor Cable is damaged.		2.	Replace the CR Motor with a new one.
3.	Check if the CR Motor operates.		3.	Replace the CR Motor with a new one.

TROUBLESHOOTING Error Indications and Fault Occurrence Causes 31

Confidential