Using word processors

Word processors usually let you use a fixed set of printer features by placing markers around the text to be altered. When the document is printed, the markers are recognized and translated into suitable commands for your printer. On your screen some programs show the markers; others display the text as it will appear-for example, in bold or italics. This method is normally restricted to features that can be found on almost all printers, such as bold and underlining.

Some word processing programs also let you insert printer commands in your text. These commands may or may not be visible on your screen. This method has the advantage of allowing you to use any printer command, not just a limited set. To make use of it, however, you need to understand how to use your printer’s commands. Check the manual for your word processor to see if you can place printer commands in your text, and then see the section in this chapter on computer-printer communications.

Using spreadsheets

Although spreadsheets seldom use as many printing styles as word processors, they do have some very specific requirements.

If your spreadsheet program provides a list of printers, use the list on page 4-2 to find the proper selection. If your spreadsheet doesn’t have a printer setup routine, read the program’s manual carefully for information on printing.

A major concern for printing spreadsheets is the width of the printer. The LQ-2550 is a 136-column printer. You can, however, increase the number of characters on a line by selecting 12 cpi, condensed mode, or both from the SelecType control panel. The table below shows you many characters you can fit on a line using these options. If your spreadsheet asks the number of columns your printer can print, decide which mode you will use and supply the appropriate number from this table.

Using Software and Graphics

4-3