PRINT OUT SETTINGS

The PRINT ClllT SETTINGS mode gives you an immediate printout of the current printer settings, the four macro settings, and the default settings.

This mode is an invaluable tool that lets you check the macro settings and defaults to decide if there is anything you want to change. It also lets you verify changes you make to these settings with SelecType.

To use this mode, make sure the printer is loaded with paper and is finished printing. Then follow the steps below.

1.Select the PRINT OUT SETTINGS mode from the SelecType main menu.

The display changes to:

:PRINTUUTSETTINGS

b

 

 

 

2. Activate this mode by pressing the b button.

The display changes to:

4fiBURT

PRINT,

 

 

 

3.Press the b button to print.

If you do not wish to print, press the 4 button. (You can also press the 4 button to abort while printing is in progress.)

Caution: Always make sure that paper is loaded before you enter the PRINT OUT SETTINGS mode.

When printing is complete, the display changes to:

:PRINTOUTSETTINGS b

You are now back at the SelecType main menu.

4.To switch to another main menu mode, press the A or V button. If you wish to exit SelecType mode, press the SelecType button.

Using the Printer

3-23