4.To switch to another main menu mode, press the A or V button. If you wish to exit SelecType mode, press the SelecType button.

5.Turn the printer off and back on again to allow the settings to take effect.Page Length

The SelecType function also enables you to set the page length of paper used with the tractor feed system or the cut sheet feeder. The page length can be set in 1/6th of an inch units within a range of 24 lines to 132 lines. Be sure that the page length is correctly set for the type of paper feed system you are using. If you are using the cut sheet feeder, the page length is automatically set and memorized when you run the printer’s built-in self test. However, you can use this Selectype feature to override this setting.

If you are using friction feed, it is not necessary to set page length with SelecType. However, be sure to select the correct page length with your application software. Also, if possible, select the hand-fed or single sheet mode with your software. If your software gives you the option of sending a form feed at the end of a page, select that capability as well.

To set the page length using SelecType, follow the steps below to set the FORM LENGTH option. The displays shown may be different if your printer’s preset settings have been changed.

1.Press the SelecType button.

The display briefly shows:

SclecTypeMODE

 

 

3-26

Using the Printer