Epson Y465ss127mo Replacing the Ribbon, #7762, #7763, #7764, #7763 : Color, #7764 : Film (black), #7762 : Standard (black), Do not use a hard or abrasive brush

WARNING:

•

•

•

•

Never use alcohols or thinners to clean the printer; these chemicals can damage the components as well as the case.

Be careful not to get water on the printer mechanism or electronic components.Do not use a hard or abrasive brush.

Do not spray the inside of the printer with lubricants; unsuitable oils can damage the mechanism. Contact your Epson dealer if you think lubrication is needed.

Replacing the Ribbon

When your printing becomes too faint, you need to replace the ribbon. The following Epson replacement ribbon cartridges are available:

#7762 : Standard (black)#7763 : Color#7764 : Film (black)

Note: The optional film ribbon prints in red near the end of the ribbon. Replace the film ribbon at this point.

To replace the ribbon follow the procedure below:

1.Turn off the power to the printer and remove the printer cover and the paper guide cover.

WARNING: If the printer has been used recently, the print head may be hot. Let it cool before attempting to replace the ribbon.

Maintenance and Transportation 5-3