Care and Maintenance

Important - Disconnect the electrical supply to the dishwasher before performing any maintenance or cleaning.

Wash Filter

Check the wash water filter, located in the base of the tank, regularly to ensure it is clear of debris. Cleaning is easily accomplished by removing the filter as an assembly and holding it under running water.

Spray Arms- The upper and lower spray arms should be checked for blockage or obstruction if ever a decline in wash performance is noticed.

Upper Spray Arm:

1.Slide the upper basket out from inside the dishwasher.

2.Undo the round nut located in the middle of the spray arm.

3.Remove the spray arm, by holding in the middle and pulling down.

4.Wash out any debris or food deposits from the holes in the spray arm under running water.

5.Replace in reverse order.

Removal & Cleaning - Unlock the circular filter assembly from the bottom of the tank by rotating counter-clockwise and lifting on its handle. No further disassembly is necessary.

Clean all three filters under running water. Use a hard brush, if necessary, to loosen difficult to remove deposits.

Replace filters after cleaning.

Important - it is essential that all filters are clean for the dishwasher to function properly.

Lower Spray Arm:

1.Remove the lower basket from the dishwasher.

2.Remove the round ring nut at the center of the spray arm.

3.Pull the spray arm out by grasping the center of the spray arm and lifting.

4.Wash out any debris or food deposits from the holes in the spray arm under running water.

5.Replace in reverse order.

Stainless Steel Care - Periodically wipe the tank and door of your dishwasher with a damp cloth. Never use metal scouring pads such as Brillo® or S. O. S.® as they will scratch the stainless parts and/or leave particles that will rust.

11

Page 11
Image 11
Equator BB65, WB 65, WB 72, SB65 manual Care and Maintenance, Wash Filter, Upper Spray Arm, Lower Spray Arm