Installation Instructions

Electrical Connection

The dishwasher requires a dedicated grounded electrical supply rated at 120 VAC, 15 amps, 60Hz.

The dishwasher is pre-fitted with a flexible power supply cord with a three-prong, grounding-type plug to connect to a grounded outlet.

The power-supply receptacle for the dishwasher must be installed in a cabinet or on a wall adjacent to the undercounter space in which the appliance is to be installed.

Provide an opening, not to exceed a maximum 1- 1/2" (38 mm) diameter, through the cabinet partition for the attachment plug and cord to pass through.

Suitably treat the edges of the specified opening as follows:

Wood cabinet: Edges must be smooth and rounded.

Metal cabinet: Order special grommet, the Service Center.

Take care when installing or removing the dishwasher to avoid possible damage to the power-supply cord.

Water Connection

The dishwasher is pre-fitted with a direction- adjustable high-pressure water supply hose that has 3/4" NPT internal pipe threads.

For your convenience, supplied with the dishwasher is a 3/8" comp. x 3/4" NPT brass fitting that adapts the hose connector to a stan- dard 3/8" compression fitting common to most household dishwasher water supply shut-off valves. As an alternative the hose can be connected directly to a locally sourced 3/4" NPT male brass connector available in most hardware stores.

Adjust the direction of the hose and its connection as it exits the rear of the machine based on the installation requirements.

Important: Ensure the hose connector on the rear of the dishwasher is fully tightened before installing.

Shut - off Valve

3/8" Comp. x 3/4" BSP

Washer

Water Supply Hose

OR

Shut - off Valve

3/4" NPT

Water Supply Hose

19

Page 19
Image 19
Equator BB65, WB 65, WB 72, SB65 manual Electrical Connection, Water Connection