Installation Instructions

Placement of the Dishwasher in the Cabinet Opening

After following all previous instructions regarding both cabinet and dishwasher preparation, the machine can now be carefully slid into the cabinet opening.

Place dishwasher in front of the opening.

Route power cord, drain line and routing hose through the necessary cut-outs in the cabinet opening.

Carefully move the dishwasher into the cabinet opening while pulling the connection lines (power, drain & water) through the cut-outs of the cabinet side panel.

Position the dishwasher such that it is properly centered in the opening and in correct alignment with the adjacent cabinet facias.

Once properly positioned, secure the dishwasher to the underside of the countertop with wood screws through the flange holes located at the top front of the dishwasher.

Important: To ensure proper door sealing and operation the following conditions must be met:

1.The machine is properly leveled (front-to-rear and side- to-side).

2.The door panel is plumb to the cabinet facia.

Adjustable Width Strips

Optional adjustable width strips (2) are provided with each dishwasher for mounting to the front of the stainless steel dishwasher tank. The strips are intended to extending the overall width of the dishwasher over exposed areas that may exist if the cabinet cut-out width is excessive.

With the screws provided, attach the width strips to the front vertical edges of the dishwasher tank as illustrated. Adjust the strips to minimize or eliminate exposed area.

Screws

Left

Side

Trim

Right

Side

Trim

21

Page 21
Image 21
Equator WB 72, WB 65, SB65, BB65 manual Placement of the Dishwasher in the Cabinet Opening, Adjustable Width Strips