It is necessary to clean the spray arms regularly for hard water chemicals will clog the spray arm jets and bearings. To remove the spray arm, screw off the nut to take out the washer on top of the spray arm and remove the arm. Wash the arms in soapy and warm water and use a soft brush to clean the jets. Replace them after rinsing them thoroughly.

Filter assembly

For best performance and results, the filter assembly must be cleaned.

The filter efficiently removes food particles from the wash water, allowing it to be recirculated during the cycle. For this reason, it is a good idea to remove the larger food particles trapped in the filter after each wash cycle by rinsing the semicircular filter and cup under running water. To remove the filter assembly, pull on the cup handle in the upward direction. The entire filter assembly should be cleaned at least once a month.

To clean the coarse filter and the fine filter, use a cleaning brush. Then, reassemble the filter parts as shown in the figures left and reinsert the entire assembly in the dishwasher, positioning in its seat and pressing downward.

The dishwasher must never be used without the filters. Improper replacement of the filter may reduce the performance level of the appliance and damage dishes and utensils.

Never run the dishwasher without the filters in place.

To clean the edge around the door, you should use only a soft warm, damp rag. To prevent penetration of water into the door lock and electrical components, do not use a spray cleaner of any kind.

Also, never use abrasive cleaners or scouring pads on the outer surfaces because they will scratch the finish. Some papers towels can also scratch or leave marks on the surface.

Never use a spray cleaner to clean the door panel for it could damage the door lock and electrical components. It is not allowed to use the abrasive agent or some paper towel because of the risk of scratching or leaving spots on the stain- less steel surface.

After every wash, turn off the water supply to the appliance and leave the door slightly ajar so that moisture and odors are not trapped inside.

Before cleaning or performing maintenance, always remove the plug from the socket. Do not run risks.

To clean the exterior and rubber parts of the dish- washer, do not use solvents or abrasive cleaning products. Rather, use only a cloth and warm soapy water.To remove spots or stains from the surface of the interior, use a cloth dampened with water and a little white vinegar, or a cleaning product made specifically for dishwashers.

When you go on holiday, it is recommended that you run a wash cycle with the dishwasher empty and then re- move the plug from the socket, turn off the water supply and leave the door of the appliance slightly ajar. This will help the seals last longer and prevent odors from forming within the appliance.

If the appliance must be moved, try to keep it in the verti- cal position.If absolutely necessary, it can be positioned on its back.

One of the factors that cause odors to form in the dishwasher is food that remains trapped in the seals. Periodic cleaning with a damp sponge will prevent this from occurring.

7

Page 10 Page 12
Page 11
Image 11
Equator SP 818, WP 818 manual
Page 10 Page 12

SP 818, WP 818 specifications

Equator WP 818 and SP 818 are notable models in the world of high-performance electric bicycles, designed to meet the demands of modern riders seeking both functionality and an eco-friendly commuting option. These e-bikes stand out for their combination of innovative technologies, robust features, and user-centric design.

At the heart of the Equator series is a powerful, yet efficient electric motor that provides smooth acceleration and the ability to tackle various terrains with ease. The motor's integration with a high-capacity lithium-ion battery enables long rides with minimal downtime. Riders can expect a range of up to 50 miles on a single charge, making these models ideal for both short commutes and longer journeys.

One of the main highlights of the WP 818 is its advanced pedal-assist system. This feature ensures that riders can easily customize their level of assistance based on their preferences and the terrain. Whether navigating through city streets or climbing hills, the pedal-assist system provides a natural riding experience, allowing users to enjoy the physical activity of cycling while benefiting from electric power when needed.

On the other hand, the SP 818 offers a distinctive set of features tailored towards sportier riders. With a lightweight aluminum frame, this model enhances performance by improving maneuverability and speed. The SP 818 is equipped with superior suspension technology, ensuring that the ride remains smooth and comfortable, even on uneven surfaces.

Both models prioritize safety and security. They come outfitted with high-quality disc brakes for reliable stopping power in various weather conditions. Additionally, the bikes feature bright LED lights, ensuring visibility during nighttime rides. The inclusion of puncture-resistant tires further adds to rider confidence and reduces the risk of getting stranded due to flat tires.

For tech-savvy users, the Equator WP 818 and SP 818 incorporate smart connectivity features. Riders can track their performance metrics, including speed, distance, and battery health, via a user-friendly smartphone app. This integration helps in maintaining optimal ride conditions and enhances the overall user experience.

In summary, the Equator WP 818 and SP 818 embody a blend of performance, technology, and versatility. Their powerful electric motors, advanced features, and attention to safety make these e-bikes a smart choice for anyone looking to combine practicality with excitement in their daily travels. Whether for commuting or leisurely rides, both models provide an exceptional experience on two wheels.
Top Page Image Contents