You have now installed the GPRS connection. To connect to the GPRS network, follow steps 1 to 3:

1)Go to ‘My Computer’-> Dial-Up Networking’ and open the previously configured connection.

2)Type the user name and password provided by your network operator and verify that the telephone number is *98#. Then press ‘Connect’.

3)Once you are connected, you may use your connection as an ordinary Internet connection.

Note: if your network operator has provided you with a Proxy Address, you should configure your Web browser (Internet Explorer, Netscape, etc.) accordingly.

Windows NT GPRS set-up

Warning!: your PC must have the Remote Access Service and the TCP/IP protocol installed within the network components. You can check this in ‘Start- >Settings->Control Panel’ and double clicking on ‘Network’. If not, these components have to be previously added from your Windows installation disk.

44 Annex: PC data configurations

Page 45
Image 45
Ericsson F221m manual Windows NT Gprs set-up